Combat Application Tourniquet: Difference between revisions

From Protocopedia
Jump to navigation Jump to search
mNo edit summary
 
(3 intermediate revisions by the same user not shown)
Line 7: Line 7:
The C.A.T. uses a self-adhering band and friction adaptor buckle to fit a wide range of extremity sizes combined with a one-handed windlass system. The windlass system uses a free moving internal band to provide even circumferential pressure to the extremity.
The C.A.T. uses a self-adhering band and friction adaptor buckle to fit a wide range of extremity sizes combined with a one-handed windlass system. The windlass system uses a free moving internal band to provide even circumferential pressure to the extremity.


[[File:Picture_of_CAT.jpg|left|Combat Application Tourniquet]]


====EQUIPMENT:====
<br clear=all>
 
====APPLICATION PROCEDURE:====
* C.A.T. application
** Step 1
***Apply tourniquet proximal to the bleeding site.
***Route the band around the limb and pass the tip through the inside slit of the buckle.
***Pull the band tight.
**Step 2
***Pass the tip through the outside slit of the buckle.
***The friction buckle will lock the band in place.
**Step 3
***Pull the band very tight and securely fasten the band back on itself.
**Step 4
***Twist the rod '''until bright red bleeding has stopped and the distal pulse is eliminated'''.
**Step 5
***Place the rod inside the clip; locking it in place.
***'''Check for bleeding and distal pulse'''.
****If bleeding is not controlled, consider additional tightening or applying a second tourniquet proximal side by side to the first and reassess.
**Step 6
***Secure the rod inside the clip with the strap.
***'''Prepare the patient for transport and reassess'''.
***Record the time of application.
 
[[File:CAT_Application.jpg|left|Combat Application Tourniquet Application]]
[[Category:Procedure Guidelines|0936]]

Latest revision as of 17:49, 1 February 2018

Procedure Guidelines

9.36 COMBAT APPLICATION TOURNIQUET

Severe traumatic extremity injuries with uncontrolled bleeding may sometimes require the application of a tourniquet. The Combat Application Tourniquet (C.A.T.) is designed to provide effective pressure on the injured extremity to occlude arterial bleeding. The C.A.T. is approved for use by SCEMS personnel where tourniquet application is indicated. See PP 6.06 “Extremity Injuries” for indications.

FEATURES:

The C.A.T. uses a self-adhering band and friction adaptor buckle to fit a wide range of extremity sizes combined with a one-handed windlass system. The windlass system uses a free moving internal band to provide even circumferential pressure to the extremity.

Combat Application Tourniquet
Combat Application Tourniquet


APPLICATION PROCEDURE:

  • C.A.T. application
    • Step 1
      • Apply tourniquet proximal to the bleeding site.
      • Route the band around the limb and pass the tip through the inside slit of the buckle.
      • Pull the band tight.
    • Step 2
      • Pass the tip through the outside slit of the buckle.
      • The friction buckle will lock the band in place.
    • Step 3
      • Pull the band very tight and securely fasten the band back on itself.
    • Step 4
      • Twist the rod until bright red bleeding has stopped and the distal pulse is eliminated.
    • Step 5
      • Place the rod inside the clip; locking it in place.
      • Check for bleeding and distal pulse.
        • If bleeding is not controlled, consider additional tightening or applying a second tourniquet proximal side by side to the first and reassess.
    • Step 6
      • Secure the rod inside the clip with the strap.
      • Prepare the patient for transport and reassess.
      • Record the time of application.
Combat Application Tourniquet Application
Combat Application Tourniquet Application